Clamping Parts (Screw Accessories)（Page4）

• 

  Thrust Bolt 7110D

  NABEYA

  S 45C / hardening HRC 30±5, thrust bolt 7110D.

  Days to Ship:	14 Day(s) or more

• 

  Double gooseneck clamp

  NABEYA

  S 45C double gooseneck clamp. Surface treatment: baked coating

  Days to Ship:	16 Day(s) or more

• 

  Double End Clamp

  NABEYA

  S 45C / hardening HRC 30±5 double end clamp. Surface treatment: Black oxide coating

  Days to Ship:	16 Day(s) or more

• 

  Heel Bolt

  NABEYA

  SUM 22 / hardening HRC 40 to 45 heel bolt. Surface treatment: Black oxide coating

  Days to Ship:	14 Day(s) or more

• 

  Locating Screw

  NABEYA

  SUM22/quenched HRC50-60 locating screw.

  Days to Ship:	14 Day(s) or more

• 

  Flat Washer (Thick Washer)

  NABEYA

  A washer with black oxide surface treatment.
  [Features]
  · Thicker than normal washers.
  · The thickness can be selected according to the application.
  · S45C / quenched HRC30±5.
  [Application]
  · Convenient when tightening nuts.

  Days to Ship:	14 Day(s) or more

• 

  Clamp Bar Type A

  NABEYA

  Round hole type clamp bar / Length can be selected according to the object to be clamped

  Days to Ship:	14 Day(s) or more

• 

  Swivel Nut

  NABEYA

  S45C/quenched HRC30±5 swivel nut.

  Days to Ship:	14 Day(s) or more

• 

  Thrust Bolt Extension 7110DV

  NABEYA

  S45C/quenched HRC30±5 thrust bolt extension 7110DV.

  Days to Ship:	16 Day(s) or more

• 

  Center Jack

  NABEYA

  [Features]
  · Centering and support for workpieces with scale can be done quickly.
  · CJU type has a flat ball set at the tip

  Days to Ship:	16 Day(s) or more

• 

  Case nut

  NABEYA

  This is the SUM 22 cap nut. The surface is black oxide coating, and there are many types available.

  Days to Ship:	14 Day(s) or more

• 

  Case nut (SUS)

  NABEYA

  SUS 316 cap nut (SUS) / Ideal for environments such as where rust should be avoided.

  Days to Ship:	16 Day(s) or more

• 

  Plug Clamp Set

  NABEYA

  [Features]
  · The world's first engineering plastic (PBT resin) made clamping set.
  · Uses materials with excellent strength and rigidity, and has the highest level of elasticity of all the various types of engineering plastics.
  · Lightweight at 1/10 the weight of steel.
  · Easy to carry, allowing reduced setup time.
  · These do not rust and are ideal to use with clamps in places and for work where rust is not acceptable, allowing consistently clean use.
  · Can softly clamp workpieces without scratching them.
  · It is convenient for clamping soft materials and completed products.
  · Ideal for clamping objects for measurement using 3D measuring machines. Even if dropped, it will not mark the table or workpiece, or cause injury.
  · Can also be used as a clamp for electric discharge machines. Both synthetic and kerosene types of cutting fluid can be used.
  · Can also be used for light work clamps such as for sculpting.
  · In order to increase strength and rigidity, aluminum is used for stud bolts (A5056). Anodized and rust-proof.
  · An innovative design with fully considered functionality.

  Days to Ship:	14 Day(s) or more

• 

  Blackened spherical washer (SUM22)

  NABEYA

  Does not affect the parallelism of workpieces or bolts, etc., and enables stable tightening to be constantly achieved. A concave-convex set.

  Days to Ship:	14 Day(s) or more

• 

  Spherical Washer (SUS304), Convex

  NABEYA

  SW-SSM/SSF: Spherical washer made of SUS304.

  Days to Ship:	14 Day(s) or more

• 

  Plain Clamp Screw Support & TS Set

  NEW STRONG

  ● Please use the set product for work streamlining.
  ● It allows the range of machining to expand.
  ● Time savings.

  Days to Ship:	16 Day(s) or more

• 

  Clamping Kit, MK Type

  NEW STRONG

  [Features]
  ·Comes with a metal rack.
  ·1 set of this product per MC is useful for clamping workpieces.
  ·A basic type standard clamp jig tool set.
  ·It allows the range of machining to expand.
  ·Time savings.
  [Applications]
  For mounting workpieces.

  Days to Ship:	16 Day(s) or more

• 

  T Nut and Stat Set

  NEW STRONG

  ● The set includes bolts, T-nuts, flange nuts, coupling nuts, and a wooden base.
  ● Comes with a wooden base that is easy on the jigs.

  Days to Ship:	16 Day(s) or more

• 

  Step Clamp【1-2 Pieces Per Package】

  NEW STRONG

  S45C/Black oxide finished type
  
  [Features]
  · This clamp interlocks with the step block and the rack meshes with any block

  Days to Ship:	16 Day(s) or more

• 

  Slide Strap Clamp

  NEW STRONG

  Using the reset bolt and clamp support, loosen the nut and slide the main body to the right and left to smoothly detach the workpiece.

  Days to Ship:	16 Day(s) or more

• 

  U-Clamp with Screw Hole

  NEW STRONG

  This product does not include CHS bolts. Materials: S 45C, Hardness: HRC 30 to 35, black oxide coating finish type.

  Days to Ship:	8 Day(s) or more

• 

  Tap and Nose Clamp

  NEW STRONG

  The hold part is used for round holes, convex parts, U arcs, etc. There is allowance in the adjustment of the clamp distance for slots

  Days to Ship:	16 Day(s) or more

• 

  Z-Clamp

  NEW STRONG

  The lower fastening nut head on the Z type makes the clamp easier to work with

  Days to Ship:	16 Day(s) or more

• 

  Gooseneck clamp

  NEW STRONG

  The Z-type clamp has a long set bolt hole, so there is plenty of room for adjustment.

  Days to Ship:	16 Day(s) or more

• 

  Step Block

  NEW STRONG

  All racks between 1S and 9S can be unified and are designed to be locked together. The pitch has been finely honed so that parallel clamps can be maintained regardless of workpiece shape.

  Days to Ship:	16 Day(s) or more

• 

  Spherical flange nut with washer S45C

  NEW STRONG

  [Features]
  · For tightening inclined clamps.
  · S45C, HRC35, black oxide finish type.

  Days to Ship:	14 Day(s) or more

• 

  Knurled Nut

  NEW STRONG

  [Features]·S 45C, HRC 30 to 38, black oxide coating finish type.

  Days to Ship:	16 Day(s) or more

• 

  Rotary T Slot Nut

  NEW STRONG

  Bolt fixing nut for T-groove. Materials: S 45C, Hardness: HRC 30, black oxide coating finish type.

  Days to Ship:	16 Day(s) or more

• 

  Stack Bolt

  NEW STRONG

  When bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.

  Days to Ship:	1 Day(s) or more

• 

  Stud Bolt (Inch Size)

  NEW STRONG

  When bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.

  Days to Ship:	14 Day(s) or more

• 

  S45C bolt with swivel pad

  NEW STRONG

  ● A receiving bolt for clamps.
  ● It can be used even if the clamp is slightly tilted.

  Days to Ship:	16 Day(s) or more

• 

  Swing Washer

  NEW STRONG

  [Features]
  ·S45C, HRC40, black oxide coating finish type.
  ·Improves the efficiency of attachment/removal work.
  ·No need to remove washers

  Days to Ship:	16 Day(s) or more

• 

  Leveling pad

  NEW STRONG

  For clamp end support bolt and push bolt

  Days to Ship:	Same day

• 

  Swivel Nut & Grip Pad

  NEW STRONG

  A swivel nut and a grip pad.
  [Nut]
  ·For clamp work.
  ·It can be used by attaching it to the tip of the tightening bolt of a jig or tool.
  [Bolt]
  ·This recessed pad is for anti-slip of black leather workpieces.
  ·It can be used for various purposes.
  ·It can be used as a fixing pad.

  Days to Ship:	16 Day(s) or more

• 

  Rest Nut

  NEW STRONG

  [Features]
  3 types of rest nuts with different shapes.
  ·Materials: SCM440
  ·Hardness: HRC60
  ·Finish: black oxide coating
  ·Weight: 42 g / 43 g / 63 g / 76 g / 80 g /

  Days to Ship:	16 Day(s) or more

• 

  Clamping Screw (A Type)

  NEW STRONG

  [Applications]
  For clamp work.
  [Features]
  ·Useful for positioning workpieces.
  ·The steel ball attached to the tip is flat.
  ·This product clamps workpieces securely on both flat and inclined surfaces.
  ·Supported by a surface, it can be used when the workpiece is flexible, when tightening force is applied, or when the workpiece is at an angle.

  Days to Ship:	16 Day(s) or more

• 

  Swivel Aligning Bolt

  NEW STRONG

  The main body is hexagonal, making it easy to install.

  Days to Ship:	16 Day(s) or more

• 

  Adjusting Bolt

  NEW STRONG

  [Features]
  ·S45C type.
  ·The knurled sides make it easy to make fine adjustments by hand during clamping.

  Days to Ship:	16 Day(s) or more

• 

  Socket Driven Swivel Screw

  NEW STRONG

  [Features]
  ·S45C type.
  ·The swivel tip and hex socket allow for a wide range of applications.
  [Applications]
  For clamping irregularly shaped workpieces.

  Days to Ship:	14 Day(s) or more

• 

  Inch Cut Bolt

  NEW STRONG

  [Features]
  · Full-thread (size L: 1,000 mm) type.
  · M8 to M20 are available.
  · Cut to the necessary length for use.
  · Length can be easily adjusted.
  · For light tightening and installation work.
  · For various other uses too.

  Days to Ship:	22 Day(s) or more

• 

  T- Slot Nut (T Type Raw Material)

  NEW STRONG

  [Material] S45C Mild Steel
  · For fixing workpieces on milling machines and drill presses. It is given T-groove bolt hole drilling

  Days to Ship:	16 Day(s) or more

• 

  Slide Clamp CGS Type

  NEW STRONG

  · CGS type slide clamp. Ideal for clamping thin workpieces.
  · Tightening is performed while pressing the toe (tip) downward against the workpiece, preventing the workpiece from lifting.

  Days to Ship:	16 Day(s) or more

• 

  Slide Clamp DGS Type

  NEW STRONG

  · DGS type slide clamp. Ideal for clamping thin workpieces.
  · Tightening is performed while pressing the toe (tip) downward against the workpiece, preventing the workpiece from lifting.

  Days to Ship:	12 Day(s) or more

• 

  Ball Roller

  NEW STRONG

  [Features]
  · Material: Main Body: SUS304, Spacer: SUS304, Main Ball: SUS440 HRC55°, Sub-Ball: SUS440 HRC55°

  Days to Ship:	16 Day(s) or more

• 

  T Nut and Stand Set

  SUPER TOOL

  [Features]
  · Easy and convenient for workpiece mounting.
  · Includes: Stud bolts (6 sizes x 4 each), flange nut (4 pcs), coupling nut (4 pcs), T-slot nut (6 pcs)

  Days to Ship:	14 Day(s) or more

Loading...