Flat Type

• 

  Key Locks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Double Snatch Lock Handle A-887

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle is connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  Days to Ship:	29 Day(s) or more

• 

  Embedded Handle for Sealing FA-815N-2

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
  · Uses the trigger method, which makes handle operation easy and improves security.
  · Even if it gets locked while working inside the cabin, the safety push rod (FC-705· 706), etc. can be used to escape.
  · The doors for dry vans (t = 13 to 14) can have pipes inside.
  · In this case, using a back cover (FA-815-2-UC) or pipe guide (FA-815-G) leaves the inside of the door refreshed.
  · Lock has a reversible key and a dust-proof shutter.
  · Indicator for confirmation so there is no forgetting to lock.
  · Left and right combination

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Door Lock, Handle (DLH)

  IMAO CORPORATION

  [Features]
  · Has a keyhole and attached key.
  · You can remove the key only at the locking position and at 180° from the locking position.
  · The installation pitch of the long hole is 13.5 to 40.5 of the movable side and fixed side

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Oval Handle AP-867

  TAKIGEN

  [Features]
  · Due to its round design it has a soft appearance.
  Waterproof structure that can be used with any door.
  · Lock has a reversible key and a dust-proof shutter.
  · Left and right combination

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Lift-Up Handle A-868

  TAKIGEN

  [Features]
  · This handle adapts to every door; lift doors, sliding doors, opening doors, etc.
  · Large and easy to operate.
  · Remote operation of locking device is possible using rod.
  · Lock has a reversible key and a dust-proof shutter.
  · For left hand or right hand use

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Flat Snatch Lock Handle, for Plastic Thick Sliding Door, AP-151RK-B

  TAKIGEN

  [Features]
  · Can be attached to a thick door with a thickness of 8.5 to 10 mm.
  · Snatch lock type flat handle that is resistant to vibration and impact.
  · One-touch open/close with soft operation.
  · Durable resin

  CAD ：

  2D

  Days to Ship:	22 Day(s) or more

• 

  Plastic Push Button Latch, C-215

  TAKIGEN

  [Features]
  · Pushing the push button moves the latch by 6 mm

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Snap-In Latch_80

  NABEYA BI-TECH

  Matte style exterior. Standardized in 2 colors, Black / White. Can be used for both sliding door and swing door.

  Days to Ship:	9 Day(s) or more

• 

  Lift-and-Turn Compression Latch_62

  NABEYA BI-TECH

  Pushing the top of the lever and lifting the lever retracts the ball and the lock is disengaged. Next, if the lever is aligned, the ball rotates and you can open the door. To close door, do the same action in reverse.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Adjustable Lever Latch_C2

  NABEYA BI-TECH

  When the button is pushed, the lever is pushed up by the built-in spring, and the lock is disengaged.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Inner Handle A-866

  TAKIGEN

  [Features]
  · (A-866-1) Inner handle connecting ø4 rods.
  · Easy to install.
  · (A-866-2) Inner handle that connects ø3.5 rods

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Plastic Inner Handle AP-866

  TAKIGEN

  [Features]
  · Flat plastic handle with few projections.
  · Integrated structure of inner handle and inner lock.
  · Can be installed with 1 screw

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Outer Handle for Cabins A-885

  TAKIGEN

  [Features]
  · Flat type with few projections from the door surface.
  · Remote operation of locking device is possible using rod or wire.
  · For right / left use.
  · A-885-1-1 is only for left side (-L)

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Gate Lock Handle A-860N

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · The mounting plate is smaller than conventional products.
  · The protrusion from the door surface is a thin 17 mm.
  · Lock has a reversible key and a dust-proof shutter

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Drawer Handle A-1860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is made of stainless steel and has excellent corrosion resistance

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Surface Attachment Type Handle FA-1947

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Imposition type is easy to install and maintain.
  · By just pulling the grip, you can open and close with one touch.
  · Made using elastomer resin for good grip.
  · Lock has a reversible key and a dust-proof shutter.
  · Can be sealed.
  · For both left hand and right hand use

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Double Snatch Lock Handle A-866-1L

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle and outer handle are connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  Days to Ship:	13 Day(s) or more

• 

  Hat Rack Handle A-876

  TAKIGEN

  [Features]
  · 2 types, R40 and R100 are available to suit the curved surface of in-cabin luggage compartments on passenger aircraft, etc.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Plastic Cover Latch AP-846

  TAKIGEN

  Days to Ship:	13 Day(s) or more

• 

  Flash Handle A-873

  TAKIGEN

  [Features]
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Plastic Flush Handle AP-874

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Round, flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Plastic Flush Handle AP-883

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Flush Handle with Control Center A-873-1C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Flush Handle with Control Center A-873-2C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Flush Handle with Control Center A-873-2C-G

  TAKIGEN

  [Features]
  · A-873-2C reverse link type.
  · Remote operation of locking device is possible using rod or wire.
  · The control center of the conventional product is equipped with an internal locking / unlocking mechanism.
  · With a dust proof shutter reversible key, the built-in click mechanism gives a feeling of reliable operation.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status.
  · Key operation is the same as in a passenger car, with one place where the key can be removed

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Latch Type Handle A-195

  TAKIGEN

  [Features]
  · Door can be opened and closed with one touch

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Latch-Type Large Plane Handle A-530

  TAKIGEN

  [Features]
  · Two point tightening closes big doors tightly.
  · One-touch opening and closing.
  · Can be installed without caulking the rod (A-530-2).
  · For right and left use (A-530-1)

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Flash handle A-898 for Sliding Doors

  TAKIGEN

  [Features]
  · Handle for sliding door.
  · Thinner than conventional product (A-878-1).
  · Handle shape that is easy to hook with your fingers.
  · Can adjust rod length.
  · Lock has small reversible key.
  · For right opening, for left opening

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Resin Handle for Sliding Doors AP-889

  TAKIGEN

  [Features]
  · Soft to the touch.
  · There is a finger hook for closing the door, with smooth operation.
  · Ideal for small sliding doors.
  · For both left hand and right hand use

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Round Flush Handle A-55

  TAKIGEN

  [Features]
  · Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Plastic Large Lid Handle AP-886

  TAKIGEN

  [Features]
  · Soft touch handle ideal for large lift doors.
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Flat Snatch Handle A-885-B

  TAKIGEN

  [Features]
  · Flat type with few projections from the door surface.
  · Lock has a reversible key and a dust-proof shutter.
  · Snatch-lock type flat handle is strong against vibration and impact

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Installed Handle A-860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is big and easy to grasp with excellent operability.
  · Lock has a reversible key and a dust-proof shutter

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Installed Plane Handle A-651

  TAKIGEN

  [Features]
  · Flat type with few protrusions on door surface.
  · 2 point tightening can be done by incorporating rods.
  · With the built-in click mechanism, a reliable operation feeling can be obtained.
  · Left and right combination

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Plastic, Under Latch CP-387

  TAKIGEN

  Lightweight and ideal for small doors. Can be closed with one touch. Durability is excellent due to using springs.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Stainless Steel Snatch Type Flush Handle A-1521

  TAKIGEN

  [Features]
  · Snatch lock type flat handle that is resistant to vibration and impact.
  · Flat type with few protrusions on the door surface.
  · Made of all stainless steel and has excellent corrosion resistance

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Paddle Type Flush Handle, A-1880

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · The lock has a dust-proof shutter

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Paddle Type Flush Handle, A-1881

  TAKIGEN

  [Features]
  · Flat type with few protrusions from the door surface.
  · Ideal for small doors.
  · The lock has a dust-proof shutter.
  · Rod and latch (C-625, etc.) combination can enable 2 way tightening with one touch. (A-1881-2)

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Paddle Type Flush Handle, A-1882

  TAKIGEN

  [Features]
  · 1-point tightening (latch type), 2-point tightening, 3-point tightening, and outer/inner handle can be chosen.
  · Made of stainless steel, corrosion resistant.
  · Lock has a reversible key and a dust-proof shutter.
  · Since the resin is built into the latch, operation is smooth.
  · A knob for unlocking from inside also can be installed

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Handle, C-1415-H

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Waterproof type (with O ring / sheet packing) with cap that has excellent dust-proof properties.
  · Can be unlocked from inside with a safety mechanism.
  · Dedicated handle (C-1415-H) used for locking and unlocking, and you can lift the hatch with the handle

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Latch Type Flush Handle A-1151R

  TAKIGEN

  [Features]
  · Due to its round design it gives a soft appearance.
  · The door can be opened and closed with one touch.
  · Dimensionally compatible with the A-151 series, with dust-proof and drip proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment).

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel Latch Type Flush Handle A-1151R-A

  TAKIGEN

  [Features]
  · Dust-proof and drip-proof structure.
  · Since the latch and the handle are interlocked, it is possible to confirm closing of the door.
  · Soft fully curved design.
  · With three way tightening, even big doors can be tightly closed.
  · Rod and latch (C-1040, etc.) combinations can enable three way tightening with one touch.
  · To improve dust proof properties, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Latch Type Flush Handle A-1252

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Vibration resistant latch and striker.
  · Flat type with few protrusions on the door surface

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Stainless Steel Ring Latch C-1044

  TAKIGEN

  [Features]
  · Since the pull tab stops at 60°, it is ideal for large-sized doors with plurality of use.
  · The strength of the latch can be adjusted with screws.
  · Panel drilling is easy

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

Loading...