AS ONE Laboratory Materials / Sheets / Packings

• 

  Kalrez® O-Ring

  AS ONE

  · It demonstrates stability against most chemicals, such as ethers, ketones and oxidizing agents, which were difficult to handle using conventional fluororesins.
  · Relative maintenance of physical properties as rubber even at high temperatures approaching 300°C.

  Days to Ship:	Quote

• 

  Stainless Steel Seamless Pipe

  AS ONE

  AS ONE, experimental materials / sheets / packing, Stainless Steel Seamless Pipe, MTSUS Series, length: 1,000 mm

  Days to Ship:	25 Day(s) or more

• 

  Thermal Insulation Glass Cloth

  AS ONE

  The product can be used as a thermal insulation material or to prevent stress corrosion of stainless steel. There is little chlorine and fluorine content, making it suitable for piping in nuclear power generators. YSK-G-AJ has excellent water, oil, and heat blocking performance.

  Days to Ship:	Quote

• 

  PTFE Net

  AS ONE

  [Specifications]
  · Material: PTFE (Tetrafluoroethylene)
  · Hole Dimensions: 9 x 3.5 mm
  · Thickness: 1.6 mm

  Days to Ship:	16 Day(s) or more

• 

  Silicone Sponge Sheet RA

  AS ONE

  The product is made of silicone rubber and excellent in heat and cold resistance. The sheet surface has a skin layer with separated bubbles and intercepts air or water.

  Days to Ship:	Quote

• 

  Aluminum Plate

  AS ONE

  It is an aluminum plate with excellent corrosion resistance and high thermal conductivity that can be used for production processing.

  Days to Ship:	20 Day(s) or more

• 

  Polyimide Film (Kapton ®) 50 μm

  AS ONE

  Days to Ship:	16 Day(s) or more

• 

  Vinyl Film Sheet

  AS ONE

  [Material]
  · Material: PVC (Polyvinyl Chloride Resin)

  Days to Ship:	Quote

• 

  UV Cut Film Width (mm) 970/1270

  AS ONE

  Cuts ultraviolet rays by 99% or more. Transmits 87% of visible light, providing superior transparency. Effective for preventing products and covers from browning or deteriorating. Consists of film, adhesive, and release film for easy handling.

  Days to Ship:	Quote

• 

  Stainless Steel Tube SUS304

  AS ONE

  [Material]
  · Material: Stainless steel (SUS304)

  Days to Ship:	16 Day(s) or more

• 

  Glass Plate Quartz

  AS ONE

  · It features low thermal expansion coefficient and high heat resistance temperature.
  · It has high purity and very few impurities.
  · It has excellent light transmittance in ultraviolet and infrared areas.

  Days to Ship:	16 Day(s) or more

• 

  Rubber Mat Vertical Reinforcement, S Rubber Mat

  AS ONE

  · Effective for fatigue alleviation, anti-slip, etc.
  · It has excellent shock absorption and sound insulation.

  Days to Ship:	Quote

• 

  Brass Rod

  AS ONE

  [Features]
  ・Used for bolts, nuts, machine screws, gears, etc.
  [Specifications/Precautions]
  ・Outer diameter x length (mm): Φ32×600
  ・Outer diameter tolerance (mm): ±0.08

  Days to Ship:	16 Day(s) or more

• 

  Resin Media (Dry), Melamine Resin 250–180 μm

  AS ONE

  [Features]
  · Soft blasting material that is gentle on the workpiece surface.
  [Product Specifications]
  · Model number: MM-M#80
  · Material: Melamine Resin
  · Particle Size (μm): 250 to 180
  · Specific Gravity: 1.46 – 1.53
  · Heat resistance temperature: 100°C
  · Heat Distortion Temperature: 205°C
  · Hardness (Rockwell M): 100-125
  · Capacity: 20 kg

  Days to Ship:	22 Day(s) or more

• 

  Quartz Beaker 500 mL

  AS ONE

  [Features]
  · Not marked with a scale.
  [Product Specifications]
  · Capacity (ml): 500
  · Trunk Diameter x Height (mm): φ90 x 120
  · Material: Quartz Glass
  · * Beaker creation according to your desired size is possible. Allows overlay welding of letters and numbers for identification.

  Days to Ship:	18 Day(s) or more

• 

  Ultrafine Silicone Sheet, 1,000 X 1,000 X 0.1; Material: Silicone Rubber

  AS ONE

  [Features]
  · A thin film silicone rubber sheet with high accuracy thickness tolerance of ±10%.
  · Environmentally friendly product that conforms to green procurement standards, as environmentally harmful substances (PRTR Law of Japan, ELV Directive, REACH, etc.) are not used.
  · The rubber and base material combination-type exhibits the characteristics of both, as the rubber and base material are tightly adhered without an adhesive layer.
  [Product Specifications]
  · Model number: SC50NNS-100
  · Size (mm): 1000 X 1000 X 0.1
  · Material: Silicone Rubber
  · * Various processing such as slitting, cutting, stamping, etc. is possible. Contact us for more information.

  Days to Ship:	16 Day(s) or more

• 

  PEEK Resin Plate 250 x 250 x 50

  AS ONE

  [Features]
  · It has excellent chemical resistance, heat resistance, radiation resistance, abrasion resistance, and sliding characteristics.
  · High quality Victrex PEEK resin is used
  [Product Specifications]
  · Size (mm): 250 X 250 X 50
  · Dimensions tolerance (thickness/O.D.)(mm): +0.50 – +2.50
  · Cut: ◎
  · Material: PEEK
  · Resin Material: Victrex (R) PEEK 450
  · Applicable Laws: European Plastic Regulations EU10/2011, FDA, Food Sanitation Act of Japan
  · Heat resistance temperature: 260°C
  · * Cutting or special processing: Cutting or processing is possible according to your desired size. ◎ = Products Cuttable for Sale: Round bar: L in 10 mm increments from 100 to 1,000 mm. Cut size accuracy: +0.00 to +3.5 mm, Plate: W can be specified in 10 mm increments from 50 to 500 mm, and D in 10 mm increments from 50 to 1,000 mm. Cut size accuracy: +0.00 to +3.5 mm * Provide drawings, etc. with clearly indicated dimensions when requesting custom processing.

  Days to Ship:	20 Day(s) or more

• 

  Zirconia Round Bar (Partially Yttria Stabilized) φ3.0x200

  AS ONE

  A yttria partially stabilized zirconia rod with low thermal conductivity, close to that of metal, high strength, high toughness, and excellent abrasion resistance.

  Days to Ship:	16 Day(s) or more

• 

  Silicon Carbide Plate (30 X 30 X 1 mm)

  AS ONE

  [Features]
  ・ It is a non-ceramic non-electric insulator with high strength and excellent heat and shock resistance

  Days to Ship:	16 Day(s) or more

• 

  AS ONE Corporation, O-Ring for Separable Tools, 9260 Series

  AS ONE

  AS ONE Corporation
  Product category: Single item
  Quantity: 1 pc.
  Materials: Perfluoro/Viton/

  Days to Ship:	18 Day(s) or more

• 

  Perfluoro O-Ring

  AS ONE

  A gasket that combines the flexibility of fluorine rubber with excellent chemical resistance and heat resistance.
  [Features]
  · Also usable for organic acids, alkalis, aqueous ammonia, ketones, esters, furan, and amines.
  * Note that the use of steam or hot water may cause distortion or deterioration.

  Days to Ship:	Quote

• 

  Fluoropolymer Mesh, 0515 Series

  AS ONE

  Net with a diamond shaped mesh pattern. It has excellent chemical resistance and heat resistance, and can be used as a filter for coarse filtration sieving. Low friction resistance, can also be used as transfer sheet that is used to move heavy specimens by sliding.

  Days to Ship:	Quote

• 

  Fluoro glass sheet

  AS ONE

  Non-adhesive type and does not stick. Low friction and favorable sliding. Features outstanding chemical resistance.

  Days to Ship:	16 Day(s) or more

• 

  Synthetic Rubber Sheet

  AS ONE

  Features outstanding heat resistance and oil resistance.

  Days to Ship:	16 Day(s) or more

• 

  Fluorine Rubber Plate

  AS ONE

  Because it is made of fluoroelastomer, it is not only resistant to solvents, but also has excellent oil, chemical, and heat resistance.

  Days to Ship:	Quote

• 

  Silicomat

  AS ONE

  It has durability superior to that of synthetic mats. Via steam holes with uniform pitch, steam removal is simple. Can be used as weights for pressing machines.

  Days to Ship:	Quote

• 

  Silicone Tack Sheet

  AS ONE

  Adhesive (one side only) is used to prevent tools from falling. Can be sterilized by autoclave, boiling water, dry heat, etc. Has no water absorbency, and dirt is also easy to clean off. Can be cut easily using scissors, cutters, etc.

  Days to Ship:	Quote

• 

  Silicone Sponge Cross-Section Size (mm) 5x10–15x20 φ5–φ10

  AS ONE

  This product is of low hardness and has excellent heat resistance as well as elasticity.

  Days to Ship:	Quote

• 

  Acrylic Pipe External Diameter (φmm) 30–300

  AS ONE

  [Material]
  · Material: PMMA (Acrylic)

  Days to Ship:	16 Day(s) or more

• 

  Platinum Wire

  AS ONE

  It is suitable for use at high temperatures and can be used for flame tests to determine metal components contained in samples.

  Days to Ship:	Quote

• 

  Fluorine Rubber O-Ring, Fluoro Plus

  AS ONE

  · Fluoroplus is a special fluororubber with dramatically improved friction characteristics and non-stickiness while maintaining the chemical resistance and heat resistance of fluororubber.
  · Features a frictional coefficient approximately 1/2 that of standard fluororubber.
  · The adhesion to metal is about 1/5 that of standard fluororubber.

  Days to Ship:	Quote

• 

  Alumina Protective Tube, JIS PT-0 Equivalent

  AS ONE

  · Features outstanding heat resistance and corrosion resistance.

  Days to Ship:	16 Day(s) or more

• 

  Glass Plate □ Tempax

  AS ONE

  Days to Ship:	16 Day(s) or more

• 

  Tough pitch copper bar

  AS ONE

  This tough pitch copper cylindrical rod with high conductivity, ductility, and high strength can be used for cutting.

  Days to Ship:	16 Day(s) or more

• 

  Resin Media (Dry), Melamine Resin 850–600 μm

  AS ONE

  [Features]
  · Soft blasting material that is gentle on the workpiece surface.
  [Product Specifications]
  · Model number: MM-M#30
  · Material: Melamine Resin
  · Particle Size (μm): 850 to 600
  · Specific Gravity: 1.46 – 1.53
  · Heat resistance temperature: 100°C
  · Heat Distortion Temperature: 205°C
  · Hardness (Rockwell M): 100-125
  · Capacity: 20 kg

  Days to Ship:	23 Day(s) or more

• 

  Resin Media (Dry), Melamine Resin 600–425 μm

  AS ONE

  [Features]
  · Soft blasting material that is gentle on the workpiece surface.
  [Product Specifications]
  · Model number: MM-M#40
  · Material: Melamine Resin
  · Particle Size (μm): 600 to 425
  · Specific Gravity: 1.46 – 1.53
  · Heat resistance temperature: 100°C
  · Heat Distortion Temperature: 205°C
  · Hardness (Rockwell M): 100-125
  · Capacity: 20 kg

  Days to Ship:	18 Day(s) or more

• 

  Resin Media (Dry), Melamine Resin 425–250 μm

  AS ONE

  [Features]
  · Soft blasting material that is gentle on the workpiece surface.
  [Product Specifications]
  · Model number: MM-M#60
  · Material: Melamine Resin
  · Particle Size (μm): 425 to 250
  · Specific Gravity: 1.46 – 1.53
  · Heat resistance temperature: 100°C
  · Heat Distortion Temperature: 205°C
  · Hardness (Rockwell M): 100-125
  · Capacity: 20 kg

  Days to Ship:	28 Day(s) or more

• 

  Polyimide Film (Kapton ®) 125 μm

  AS ONE

  Days to Ship:	16 Day(s) or more

• 

  Resin Media (Dry), Urea Resin 425–250 μm

  AS ONE

  [Features]
  · Soft blasting material that is gentle on the workpiece surface.
  [Product Specifications]
  · Model number: MM-U#60
  · Material: Urea Resin
  · Particle Size (μm): 425 to 250
  · Specific Gravity: 1.47 – 1.53
  · Heat resistance temperature: 77°C
  · Heat Distortion Temperature: 132°C
  · Hardness (Rockwell M): 115-120
  · Capacity: 20 kg

  Days to Ship:	28 Day(s) or more

• 

  Quartz Beaker 50 mL

  AS ONE

  This beaker is made of quartz glass, which has extremely low impurities, allows light to pass through, is resistant to heat, and has high transparency.

  Days to Ship:	20 Day(s) or more

• 

  Quartz Beaker 100 mL

  AS ONE

  [Features]
  · Not marked with a scale.
  [Product Specifications]
  · Capacity (ml): 100
  · Trunk Diameter x Height (mm): φ55 x 70
  · Material: Quartz Glass
  · * Beaker creation according to your desired size is possible. Allows overlay welding of letters and numbers for identification.

  Days to Ship:	19 Day(s) or more

• 

  Quartz Beaker 200 mL

  AS ONE

  [Features]
  · Not marked with a scale.
  [Product Specifications]
  · Capacity (ml): 200
  · Trunk Diameter x Height (mm): φ67 x 89
  · Material: Quartz Glass
  · * Beaker creation according to your desired size is possible. Allows overlay welding of letters and numbers for identification.

  Days to Ship:	20 Day(s) or more

• 

  Quartz Beaker 250 mL

  AS ONE

  [Features]
  · Not marked with a scale.
  [Product Specifications]
  · Capacity (ml): 250
  · Trunk Diameter x Height (mm): φ72 x 96
  · Material: Quartz Glass
  · * Beaker creation according to your desired size is possible. Allows overlay welding of letters and numbers for identification.

  Days to Ship:	19 Day(s) or more

• 

  Quartz Beaker 300 mL

  AS ONE

  [Features]
  · Not marked with a scale.
  [Product Specifications]
  · Capacity (ml): 300
  · Trunk Diameter x Height (mm): φ78 x 103
  · Material: Quartz Glass
  · * Beaker creation according to your desired size is possible. Allows overlay welding of letters and numbers for identification.

  Days to Ship:	22 Day(s) or more

• 

  Transparent Quartz Ball φ5【100 Pieces Per Package】

  AS ONE

  [Features]
  · Since it features less elution of impurities, it can be used as a filter or filler.
  · Made from SiO2, which has a higher purity compared to glass beads and contains the bare minimum of alkali impurities, providing excellent corrosion resistance and wear resistance.
  [Product Specifications]
  · Model number: I-5
  · Outer diameter (φmm): 5
  · Quantity: 1 Bag (100 g)
  · Material: Quartz Glass

  Days to Ship:	16 Day(s) or more

Loading...