FUJII DENKO Safety Belts

• 

  Comes with Hook Hanger Rope Holder Function for Full Harness

  FUJII DENKO

  [Features]
  · The hook hanger function can also hold rope.
  [Applications]
  · For full harness only.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Rorip for Inclined Surfaces KS-1

  FUJII DENKO

  The claw that grips the main rope is the only W claw in Japan. The fall arrester is grasped in the palm of the hand, so it is easy to operate. The hook thimble (for rope wear prevention) is prone to breakage because a load is applied to it. This has been overcome by employing an extra thick thimble.

  Days to Ship:	12 Day(s) or more

• 

  Rorip for Inclined Surfaces KS21-1W

  FUJII DENKO

  The fall arrester is operated easily using a lever. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Days to Ship:	12 Day(s) or more

• 

  Assist Harness for Sloped Surface

  FUJII DENKO

  A fall arrester for inclined surfaces which prevents falls caused by gripping the operation lever by mistake when not connected to the main rope. Ministry of Land, Infrastructure, Transport and Tourism "New Technology Information System NETIS" registered product. An optional product for the fall arrester for inclined surfaces.

  Days to Ship:	16 Day(s) or more

• 

  Self-Winding Belt BelBlock (8 m Type)

  FUJII DENKO

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Supporter Belt LEX

  FUJII DENKO

  [Features]
  · The cushioning has a three-dimensional construction so that it fits the waist at 3 heights.
  · Wide type.
  · The belt can be opened and closed in 3 places.
  [Applications]
  · Used in combination with a general safety belt for working at heights, provides a soft and comfortable fit.

  Days to Ship:	13 Day(s) or more

• 

  Horizontal Main Rope Tensioner 97 Harip

  FUJII DENKO

  [Features]
  · Horizontal main rope can easily be installed and removed by hand.
  [Applications]
  · Equipment for installing temporary horizontal main ropes for construction site plant work etc.
  · The tension of the main rope is around 10 to 20 kg as it is pulled by hand.

  Days to Ship:	12 Day(s) or more

• 

  Parent Rope for Raising and Lowering

  FUJII DENKO

  [Features]
  ·Tetoron rope is a vertical main rope and is a low-cost type.
  ·The hook at the tip has a mouth opening of 50 mm and can be hooked directly to a single pipe.
  [Applications]
  ·Main line for vertical movement using 78 Rorip and SS Rorip.
  ·Horizontal master rope using 97HR-3.

  Days to Ship:	12 Day(s) or more

• 

  Self-Winding Belt BelBlock

  FUJII DENKO

  [Features]
  · A small safety block for ascending and descending.
  · The strap follows automatically while the user is working.
  · Stops within about 0.6 m in case of a fall.
  · Case is made from glass fiber reinforced resin.
  · The strap has excellent strength and abrasion resistance. (Double-layer construction of super strength fiber covered with a polyester outer layer)

  Days to Ship:	8 Day(s) or more

• 

  Full Harness Safety Belt, Black Shadow

  FUJII DENKO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Full Harness, Belt Fixing Tool for Black Shadow

  FUJII DENKO

  [Features]
  · Waist belt fastener for Black Shadow full harness (R-504 series)
  · Firmly connects the harness to the waist belt.
  [Applications]
  · Waist belt fastener for Black Shadow R-504 series

  • STOCK

  Days to Ship:	1 Day(s)

• 

  For Sloped Surface, Special Lanyard with 1 Hook Per Suspension Line

  FUJII DENKO

  The fall arrester is operated easily using a lever. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Days to Ship:	12 Day(s) or more

• 

  Safety belt rope storage bag

  FUJII DENKO

  [Features]
  A rope storage bag made of canvas and nylon compatible with a belt width of 50/60.

  Days to Ship:	12 Day(s) or more

• 

  Pad for Full Harness Safety Belt

  FUJII DENKO

  [Features]
  ·It is easy to wear, lightweight, and has a shape that does not get in the way.
  ·It can be fixed with Velcro.
  ·Lightweight design will not get in the way of work.
  ·It can be fixed with Velcro in 6 places).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Supporter Belt

  FUJII DENKO

  [Features]
  ·If you set it on the torso belt of the safety belt for single hanging, it will feel soft and comfortable on your lower back.
  ·Comes with a tool hook and tool hanger.
  ·Can be used for belt widths of 50 mm and 60 mm.

  Days to Ship:	1 Day(s) or more

• 

  78 Low Lip for Raising and Lowering Fixed Position Work

  FUJII DENKO

  [Features]
  ・ Prevents falling of steel towers, utility poles, ladders, etc., while moving up and down, and prevents falling during fixed position work by switching levers
  ・ The vertical master rope can be easily attached and detached even in the middle of the master rope

  Days to Ship:	12 Day(s) or more

• 

  Safety Belt Mounting Device Screw Clamp

  FUJII DENKO

  [Features]
  · Lightweight and compact, so it can be easily operated with one hand.
  · Mounting is possible even with the safety belt hook attached.
  [Applications]
  · Jig for attaching a safety belt to an insert bolt in the ceiling.

  Days to Ship:	12 Day(s) or more

• 

  Safety Belt Mounting Device Clamp with Hook

  FUJII DENKO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Roof Work Fall Prevention Device Roof Rope 300 Type

  FUJII DENKO

  [Features]
  ・ Use a telescopic adjuster to connect the main rope attached to the hook metal fittings with a carabiner to the fall prevention equipment and move it on the roof
  ・ Since the length of the main rope is adjusted to any length with the expansion and contraction adjuster, there is little feeling of restraint and work with a margin can be done
  ・ It is a temporary fall prevention device for roofing work such as low-rise houses
  ・ Can be installed regardless of roof tiles
  [Applications]
  ・ For safety work of roof work of solar power generation system installation work and antenna work

  Days to Ship:	8 Day(s) or more

• 

  Roof Work Fall Prevention Device Roof Rope

  FUJII DENKO

  [Features]
  · A temporary and easy fall prevention device for roof work on low-rise housing, etc.
  · Can be used with any type of roof tiles.
  · BelBlock means rope does not need to be adjusted by hand.
  [Applications]
  · For installation of solar panel systems, repair of roof tiles etc.

  Days to Ship:	8 Day(s) or more

• 

  Wire Rope Winding Type, Ultra Lock 10 m/12 m/15 m/20 m

  FUJII DENKO

  [Features]
  ·A hook with a tension indicator makes it easy to check whether or not it has dropped.
  ·Comes with disk brake to minimize shock. (Approx. 4 kN)
  ·The top mounting part rotates, making it easy to install.
  ·Reserve line minimizes shock even at maximum feeding.

  Days to Ship:	1 Day(s) or more

• 

  Belt Winding Type BelBlock (Large Diameter Hook Type)

  FUJII DENKO

  [Features]
  · A small safety block for ascending and descending.
  · The strap follows automatically when the user moves.

  Days to Ship:	8 Day(s) or more

• 

  Self-Winding Belt BelBlock 15 m Type

  FUJII DENKO

  [Features]
  · The strap winding mechanism has an added deceleration function to prevent danger from sudden winding and tangling of the strap.
  · The strap follows automatically while the user is working.
  · Stops within about 0.6 m in case of a fall.

  Days to Ship:	12 Day(s)

• 

  Self-Winding Belt BelBlock, Mounting Parts

  FUJII DENKO

  [Features]
  · Use to mount the Tsuyoron safety block.
  · Easy to install with FS51 hook on one side and 50 mm loop on the other side.
  [Applications]
  · Mounting of safety block

  Days to Ship:	9 Day(s) or more

• 

  Full Harness Safety Belt, Back Part for Black Shadow

  FUJII DENKO

  Lightweight design will not get in the way of work. Coolant can be inserted into the pocket. Can be attached with Magic Tape. Shoulder/back protection for full harness. Shoulder/back cushioning protection for full harness.

  Days to Ship:	1 Day(s)

• 

  Tree Climbing Tools

  FUJII DENKO

  The short inner claws and long outer claws grip the tree when ascending and descending. One strap and elastic band is worn on each foot.

  Days to Ship:	12 Day(s) or more

• 

  Inclined Slop Assist Harness 1 Lanyard Hook Model for 2 Suspension Line

  FUJII DENKO

  The claw that grips the main rope is the only W claw in Japan. The fall arrester is grasped in the palm of the hand, so it is easy to operate. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Days to Ship:	12 Day(s) or more

• 

  Yoke Tool for Tilted Surface Belt

  FUJII DENKO

  A metal fitting that prevents the belt constricting the waist when working on inclined surfaces. Used by attaching to the back side belt.

  Days to Ship:	16 Day(s) or more

• 

  SD Rorip for Inclined Surfaces SD-3

  FUJII DENKO

  [Features]
  ・ You can work while descending with both hands available by fixing the drop speed adjustment bracket arbitrarily and tilting the main body lever
  ·Safety belt standard 3 types Safety belt: For inclined surface harnesses and vertical surface harnesses. For vertical surface work, slope work, civil engineering work, and slope work
  ・ A grip device that supports the nozzle with one hand and adjusts the descent speed with the other hand when descending an inclined surface when spraying concrete, etc.

  Days to Ship:	16 Day(s) or more

• 

  Hook Hanger for Safety Belt

  FUJII DENKO

  [Features]
  · Can be mounted on the left or right.
  · Hanger to hang large hooks, etc. when wearing a safety belt.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...