Safety Belts

• 

  Self

  ENDO KOGYO

  [Features]
  ·It incorporates a ratchet mechanism that uses centrifugal force, and has a structure that allows it to be pulled out or locked freely depending on the withdrawal speed.
  ·When the speed limit of the wire rope is exceeded, the ratchet instantly locks it to the ratchet wheel fixed to the drum, stopping the rope from being let out and preventing a fall.

  Days to Ship:	18 Day(s) or more

• 

  Safety Block

  TITAN

  [Features]
  · Equipment for preventing falls when ascending and descending.
  · All models have a built-in slide clutch, which significantly reduces the impact of a fall on the body.
  · Light and durable case made from reinforced aluminum.
  · With rust-resistant and easy-to-handle rotation hook.

  Days to Ship:	1 Day(s)

• 

  Self-Winding Belt BelBlock 15 m Type

  FUJII DENKO

  [Features]
  · The strap winding mechanism has an added deceleration function to prevent danger from sudden winding and tangling of the strap.
  · The strap follows automatically while the user is working.
  · Stops within about 0.6 m in case of a fall.

  Days to Ship:	16 Day(s)

• 

  Self-Winding Belt BelBlock (8 m Type)

  FUJII DENKO

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Self-Winding Belt BelBlock

  FUJII DENKO

  [Features]
  · A small safety block for ascending and descending.
  · The strap follows automatically while the user is working.
  · Stops within about 0.6 m in case of a fall.
  · Case is made from glass fiber reinforced resin.
  · The strap has excellent strength and abrasion resistance. (Double-layer construction of super strength fiber covered with a polyester outer layer)

  Days to Ship:	8 Day(s) or more

• 

  Rorip for Inclined Surfaces KS-1

  FUJII DENKO

  The claw that grips the main rope is the only W claw in Japan. The fall arrester is grasped in the palm of the hand, so it is easy to operate. The hook thimble (for rope wear prevention) is prone to breakage because a load is applied to it. This has been overcome by employing an extra thick thimble.

  Days to Ship:	16 Day(s) or more

• 

  Horizontal Main Rope Tensioner 97 Harip

  FUJII DENKO

  [Features]
  · Horizontal main rope can easily be installed and removed by hand.
  [Applications]
  · Equipment for installing temporary horizontal main ropes for construction site plant work etc.
  · The tension of the main rope is around 10 to 20 kg as it is pulled by hand.

  Days to Ship:	16 Day(s) or more

• 

  Safety Belt Mounting Device Clamp with Hook

  FUJII DENKO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Roof Work Fall Prevention Device Roof Rope 300 Type

  FUJII DENKO

  [Features]
  ・ Use a telescopic adjuster to connect the main rope attached to the hook metal fittings with a carabiner to the fall prevention equipment and move it on the roof
  ・ Since the length of the main rope is adjusted to any length with the expansion and contraction adjuster, there is little feeling of restraint and work with a margin can be done
  ・ It is a temporary fall prevention device for roofing work such as low-rise houses
  ・ Can be installed regardless of roof tiles
  [Applications]
  ・ For safety work of roof work of solar power generation system installation work and antenna work

  Days to Ship:	8 Day(s) or more

• 

  ProGuard Waist Supporter for Safety Belt

  TITAN

  [Features]
  · The three-dimensional construction covers the hips, significantly reducing the load. There is little misalignment due to the weight of tools, reducing fatigue when working for a long time.

  Days to Ship:	13 Day(s) or more

• 

  My Block 6 m Type

  TITAN

  [Features]
  ・ The width of the band rope is 17 mm, but it is strong enough with an ultra-high strength core material
  ・ Lightweight and easy-to-use band rope type safety block
  ・ By adopting a belt-shaped band rope, winding defects such as random winding are eliminated, and even if the band rope touches surrounding equipment, structures or cargo during use, there is no worry of damaging them like a wire rope

  Days to Ship:	16 Day(s)

• 

  Full Screw Catcher (for 3/8")

  TANIZAWA SEISAKUSHO

  [Features]
  · Small type for 3/8" screw (W3/8) only.
  · Double safety lock type with set lever, can be mounted with one hand.
  · Small and lightweight 350 g.
  [Applications]
  · As a safety belt attachment for preventing falls when carrying out construction work such as wiring/piping work on a ceiling.
  · Install on a full-thread screw embedded in a concrete ceiling, to attach the hook of a safety belt.
  · Plumbing, electrical construction, air conditioning, interior construction

  Days to Ship:	8 Day(s)

• 

  Full Harness Safety Belt, Black Shadow

  FUJII DENKO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  SD Rorip for Inclined Surfaces SD-3

  FUJII DENKO

  [Features]
  ・ You can work while descending with both hands available by fixing the drop speed adjustment bracket arbitrarily and tilting the main body lever
  ·Safety belt standard 3 types Safety belt: For inclined surface harnesses and vertical surface harnesses. For vertical surface work, slope work, civil engineering work, and slope work
  ・ A grip device that supports the nozzle with one hand and adjusts the descent speed with the other hand when descending an inclined surface when spraying concrete, etc.

  Days to Ship:	16 Day(s) or more

• 

  Grip for Vertical Main Rope

  TITAN

  [Features]
  A vertical main rope grip (single leg dedicated).
  [Applications]
  Can be used for construction, civil engineering, shipbuilding, bridges, mines, factories, plants, and others.

  Days to Ship:	16 Day(s) or more

• 

  Safety belt rope storage bag

  FUJII DENKO

  [Features]
  A rope storage bag made of canvas and nylon compatible with a belt width of 50/60.

  Days to Ship:	13 Day(s) or more

• 

  Supporter Belt LEX

  FUJII DENKO

  [Features]
  · The cushioning has a three-dimensional construction so that it fits the waist at 3 heights.
  · Wide type.
  · The belt can be opened and closed in 3 places.
  [Applications]
  · Used in combination with a general safety belt for working at heights, provides a soft and comfortable fit.

  Days to Ship:	13 Day(s) or more

• 

  Pad for Full Harness Safety Belt

  FUJII DENKO

  [Features]
  ·It is easy to wear, lightweight, and has a shape that does not get in the way.
  ·It can be fixed with Velcro.
  ·Lightweight design will not get in the way of work.
  ·It can be fixed with Velcro in 6 places).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Supporter Belt

  FUJII DENKO

  [Features]
  ·If you set it on the torso belt of the safety belt for single hanging, it will feel soft and comfortable on your lower back.
  ·Comes with a tool hook and tool hanger.
  ·Can be used for belt widths of 50 mm and 60 mm.

  Days to Ship:	1 Day(s) or more

• 

  78 Low Lip for Raising and Lowering Fixed Position Work

  FUJII DENKO

  [Features]
  ・ Prevents falling of steel towers, utility poles, ladders, etc., while moving up and down, and prevents falling during fixed position work by switching levers
  ・ The vertical master rope can be easily attached and detached even in the middle of the master rope

  Days to Ship:	12 Day(s) or more

• 

  Safety Belt Mounting Device Screw Clamp

  FUJII DENKO

  [Features]
  · Lightweight and compact, so it can be easily operated with one hand.
  · Mounting is possible even with the safety belt hook attached.
  [Applications]
  · Jig for attaching a safety belt to an insert bolt in the ceiling.

  Days to Ship:	12 Day(s) or more

• 

  Parent Rope for Raising and Lowering

  FUJII DENKO

  [Features]
  ·Tetoron rope is a vertical main rope and is a low-cost type.
  ·The hook at the tip has a mouth opening of 50 mm and can be hooked directly to a single pipe.
  [Applications]
  ·Main line for vertical movement using 78 Rorip and SS Rorip.
  ·Horizontal master rope using 97HR-3.

  Days to Ship:	16 Day(s) or more

• 

  Roof Work Fall Prevention Device Roof Rope

  FUJII DENKO

  [Features]
  · A temporary and easy fall prevention device for roof work on low-rise housing, etc.
  · Can be used with any type of roof tiles.
  · BelBlock means rope does not need to be adjusted by hand.
  [Applications]
  · For installation of solar panel systems, repair of roof tiles etc.

  Days to Ship:	8 Day(s) or more

• 

  Wire Rope Winding Type, Ultra Lock 10 m/12 m/15 m/20 m

  FUJII DENKO

  [Features]
  ·A hook with a tension indicator makes it easy to check whether or not it has dropped.
  ·Comes with disk brake to minimize shock. (Approx. 4 kN)
  ·The top mounting part rotates, making it easy to install.
  ·Reserve line minimizes shock even at maximum feeding.

  Days to Ship:	1 Day(s) or more

• 

  Belt Winding Type BelBlock (Large Diameter Hook Type)

  FUJII DENKO

  [Features]
  · A small safety block for ascending and descending.
  · The strap follows automatically when the user moves.

  Days to Ship:	8 Day(s) or more

• 

  Self-Winding Belt BelBlock, Mounting Parts

  FUJII DENKO

  [Features]
  · Use to mount the Tsuyoron safety block.
  · Easy to install with FS51 hook on one side and 50 mm loop on the other side.
  [Applications]
  · Mounting of safety block

  Days to Ship:	9 Day(s) or more

• 

  Rope Type Safety Harness Storage Bag

  TITAN

  [Features]
  This rope storage bag is made of nylon and designed for 1 rope-type lanyard.

  Days to Ship:	13 Day(s) or more

• 

  Storage Bag for Retractable Type Safety Belt

  TITAN

  [Features]
  This hook storage bag is made of nylon and has a rewind hook diameter of up to 50 mm.

  Days to Ship:	13 Day(s) or more

• 

  Horizontal Main Rope Tensioner Hand Tightener

  TITAN

  Hand tension type horizontal main rope set.
  [Features]
  · Complies with Scaffolding and Construction Equipment Association technical standards. Maximum tension = approx. 30 kg.
  · A hand tightening-type safety belt.
  · Can also be used for vertical main ropes.
  · Main rope is a 16 mm Tetron signal rope with red core.
  [Applications]
  · Roofing work / scaffolding work etc.

  Days to Ship:	16 Day(s) or more

• 

  My Block 12 m, 15 m Type

  TITAN

  [Features]
  · Equipment for preventing falls when ascending and descending.
  · Slow winding mechanism allows the rope to be wound slowly and gently.
  · Lightweight and easy-to-handle rope type safety block.
  · Belt-shaped band rope eliminates winding problems such as tangling, and there is no risk of damage like a wire rope if the rope touches nearby facilities, structures or cargo during use.

  Days to Ship:	1 Day(s)

• 

  My Block 4 m Type

  TITAN

  [Features]
  · The rope band is 17 mm wide, and contains a high strength core material for extra strength.
  · Lightweight and easy-to-handle rope type safety block.
  [Applications]
  · Construction, civil engineering, shipbuilding, bridges, mining, factories, plants etc.

  Days to Ship:	16 Day(s) or more

• 

  Hook Marker

  TJM DESIGN

  [Features]
  ·Easy to attach to the base of the hook
  ·2 colors that stand out for easy hooking

  Days to Ship:	13 Day(s) or more

• 

  Hook Seal

  TJM DESIGN

  [Features]
  · Fluorescent color makes the hook stand out.
  · The hook position is highly visible.

  Days to Ship:	12 Day(s)

• 

  Safety Belt for Hook Hanger

  TJM DESIGN

  [Features]
  ・ Resin hook hanger for hanging on the belt when the hook is not used
  ・ It is possible to hook it in 2 ways: to prevent it from falling even if it moves, and to temporarily pause it when you want to free your hands
  ・ Tajima safety belt hook hanger
  [Applications]
  ・ Hook hanger for safety belt

  Days to Ship:	13 Day(s) or more

• 

  D Ring/D Ring Buckle

  TJM DESIGN

  [Features]
  This D-ring is made of steel, weighs 45 grams, and has a compatible belt width of 50 mm.

  Days to Ship:	13 Day(s) or more

• 

  D Ring/D Ring Buckle (Aluminum)

  TJM DESIGN

  [Features]
  This D-ring stop is made of aluminum, weighs 15 grams, and has a compatible belt width of 50 mm.

  Days to Ship:	13 Day(s) or more

• 

  Hook Catch

  TSUKUSHI KOBO

  [Features]
  · Easy to install and remove.
  · Fall prevention equipment which can be used by mounting a hook catch to a full-thread screw (3/8 inch) embedded in the ceiling and attaching the hook of the safety belt.

  Days to Ship:	16 Day(s) or more

• 

  Fluorescent Prism Reflection Sticker (for Safety Belt Hook)

  TANIZAWA SEISAKUSHO

  [Features]
  · Fluorescent prism reflective material is used for high visibility from far away.
  · Visibility can be further increased by affixing a combination of hook type, round and oval stickers.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Full Screw Catcher (for Both 3/8" and 1/2")

  TANIZAWA SEISAKUSHO

  A full screw catcher that can be attached to 2 types of full screws.
  [Features]
  ・ Can be securely attached with one hand. Can be used for all 2 types of screws, W3/8 and W1/2.
  ・ Double safety lock type with set lever.
  ·Lightweight design with a body weight of 525 g.
  ・ A product compliant with the "Safety Belt Standards" of the Ministry of Health, Labour and Welfare of Japan.
  [Applications]
  ・ Reinforced concrete and steel construction sites. All places where all screws were installed from the skeleton.
  ・ For general equipment work inside the building and tile construction for the balcony.
  

  Days to Ship:	8 Day(s)

• 

  Winding Type Safety Belt, One Line Suspension Type

  TRUSCO NAKAYAMA

  [Features]
  · Has an easy-to-use large hook and the strap length can be adjusted with one touch operation of the push button.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  2-Way Retractable Safety Belt (Steel Buckle)

  TRUSCO NAKAYAMA

  [Features]
  · The product can be used either by fixing the length and winding with a button or by extending and contracting like a seat belt.
  · The lock mechanism for stopping at the shortest drop distance is built in.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rope Type Safety Belt Single Suspension Only

  TRUSCO NAKAYAMA

  [Features]
  · Lightweight and compact economy type with a hook.
  · It has a double safety lock hook.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hook Hanger Safety Belt Parts for 50 mm

  TRUSCO NAKAYAMA

  [Features]
  · It is a hanger for holding a large caliber hook and the like when wearing a safety belt.
  · 50 mm dedicated type for general-purpose safety belts.
  · Can be mounted on either left or right.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  D Ring for Safety Belt TSB

  TRUSCO NAKAYAMA

  [Features]
  · It is used for safety belts for general aerial work.
  · By using it with a D ring stopper, it can be firmly fixed to the belt.
  · Tensile strength: 11.5 kN.
  · It is has a shiny and beautiful chrome-plated finish.

  • STOCK

  Days to Ship:	Same day

• 

  D-Ring Stopper (4-Circle Type)

  TRUSCO NAKAYAMA

  [Features]
  · This product is used for fixing a D ring.
  · There are 4 holes of 53 mm diameter through which the belt passes, making it unlikely to deviate.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...